ROCK RIVER TOOL, INC.
STANDARD & SPECIAL CARBIDE TIPPED CUTTING TOOLS
Phone (800) 345-8924 | FAX (800) 867-9312
Maximum chip room for easier chip removal. Also used when machine horsepower is too low for higher capacity end mills.
Steel cutting grade flute long carbide tips brazed to hardened alloy steel bodies.
Cutting diameter NC tolerance plus .002" minus .000".
Straight shanks with drive flats.
For milling steels and tough steel alloys as indicated. Special steel cutting grade of carbide permits the higher chip loads and higher speeds required for milling steel.
Intermediate decimal cutting diameters.
Radius end.
End chamfer.
Undersize shank diameters.
Tool Diameter |
Dimensions | Type 2300 EDP NO. |
Price | ||||
Shank Diameter | No. of Flutes | Length | |||||
Frac. | Dec. | Carbide | Overall | ||||
1/4 | .2500 | 3/8 | 2 | 1/2 | 2 1/2 | 230008 | $68.40 |
5/16 | .3125 | 3/8 | 2 | 5/8 | 2 1/2 | 230010 | 71.25 |
3/8 | .3750 | 3/8 | 2 | 5/8 | 2 1/2 | 230012 | 76.05 |
7/16 | .4375 | 3/8 | 2 | 1 | 2 11/16 | 230014 | 76.05 |
1/2 | .5000 | 1/2 | 2 | 1 | 3 1/4 | 230016 | 77.80 |
9/16 | .5625 | 1/2 | 2 | 1 | 3 3/8 | 230018 | 86.30 |
5/8 | .6250 | 1/2 | 2 | 1 | 3 3/8 | 230020 | 86.30 |
3/4 | .7500 | 5/8 | 2 | 1 | 3 5/8 | 230024 | 96.85 |
7/8 | .8750 | 5/8 | 2 | 1 1/4 | 4 | 230028 | 114.45 |
1 | 1.0000 | 7/8 | 2 | 1 1/4 | 4 | 230032 | 126.45 |
1 1/8 | 1.1250 | 1 | 2 | 1 1/4 | 4 1/4 | 230036 | 129.55 |
1 1/4 | 1.2500 | 1 | 2 | 1 1/4 | 4 1/4 | 230040 | 144.45 |
1 1/2 | 1.5000 | 1 1/4 | 2 | 1 1/2 | 4 1/2 | 230048 | 186.05 |
1 3/4 | 1.7500 | 1 1/4 | 2 | 1 1/2 | 4 1/2 | 230056 | 208.65 |
2 | 2.0000 | 1 1/4 | 2 | 1 1/2 | 4 1/2 | 230064 | 249.15 |