HARD STEEL DIE DRILLS — CARBIDE TIPPED

DISCONTINUED - WHILE SUPPLIES LAST

SPADE TYPE — 120° POINT

TYPE 2674 — SPADE TYPE — 120° POINT

Flat flutes and 120ยบ point angle with flat lip clearances.
Carbide tips high temperature brazed to tool steel bodies.
Precision ground to insure concentricity of tip and shank body.


USE:

Used for shallow holes, approximately 2 diameters deep.
The short heavy construction allows more rigid hole drilling for tough applications, where longer length drills are not needed.


Below are the critical dimensions of our Die Drills. Please choose the Drills that meets your tooling needs.
Tool
Diameter
Overall Length Type 2674
EDP NO.
Price
Frac. Dec.
   3/32  .0938         267406 $17.35
   7/64  .1094         267407 17.70
   1/  .1250         267408 17.70
   9/64  .1406         267409 19.15
   5/32  .1563         267410 22.05
  11/64  .1719         267411 23.55
   3/16  .1875         267412 27.85
  13/64  .2031         267413 31.35
Don't see the Die Drills you need?
If the above dimensions do not meet your specific Die Drills needs we may be able to make modifications to one of the above Die Drills or we can quote a full special to your exact requirements. Simply click here to view and print our special tool quote form. Fill it out and fax (800-867-9312) it back to Rock River Tool. We will let you know how we will provide the Die Drills you requested.
Thank you for using Rock River Tool for your Die Drills needs.