GLASS & TILE DRILLS — CARBIDE TIPPED

CARBIDE SPEAR POINT STRAIGHT SHANK

TYPE 2680 — CARBIDE SPEAR POINT STRAIGHT SHANK

Carbide tip high temperature brazed.
Heat treated tool steel body.
Long carbide tip permits many regrinds.


USE:

Drills glass, tile, porcelain, ceramic and other hard fragile materials without chipping or cracking the material when properly used.
Speed should be about 25 surface feet per minute (300 to 600 RPM) using a steady, moderate hand feed.
Constant flow of coolant important.
Back material being drilled with wood or rubber to support material during drill break-through.
Avoid vibration and excessive stress.
Keep drill sharp to eliminate excessive pressure


Below are the critical dimensions of our Glass & Tile Drills. Please choose the Drills that meets your tooling needs.
Tool
Diameter
Dimensions Type 2680
EDP NO.
Price
Frac. Dec. Shank Diameter Overall Length
   1/  .1250    7/64  1/ 268008 $17.45
   3/16  .1875    5/32  1/ 268012 17.45
   1/  .2500    7/32  1/ 268016 20.05
   5/16  .3125    1/         268020 25.80
   3/  .3750    5/16  1/ 268024 28.70
   7/16  .4375    3/  1/ 268028 32.55
   1/  .5000    7/16  1/ 268032 35.50
   9/16  .5625    1/         268036 49.90
   5/  .6250    9/16         268040 60.15
Don't see the Glass & Tile Drills you need?
If the above dimensions do not meet your specific Glass & Tile Drills needs we may be able to make modifications to one of the above Glass & Tile Drills or we can quote a full special to your exact requirements. Simply click here to view and print our special tool quote form. Fill it out and fax (800-867-9312) it back to Rock River Tool. We will let you know how we will provide the Glass & Tile Drills you requested.
Thank you for using Rock River Tool for your Glass & Tile Drills needs.